evertz 7700 Manual page 31

7. Start the firmware upload on the terminal application (for instance, in HyperTerminal select
Transfer/Send File...), use Xmodem as the transfer protocol, and select the firmware file. For
example, ptx.bin.
8. Once the upload is complete the message upload okay is displayed.
9. Power off the PTX.
10. Set the PTX run/upgrade jumper to the run position.
11. Remove the serial adapter cable.
12. Power on the PTX.
7700PTX-MVP Unidirectional UMD Protocol Translator
Revision 1.9
7700 MultiFrame Manual
7700PTX-MVP - 27