evertz 7700 Manual page 24

7700 MultiFrame Manual
7700PTX-MVP Unidirectional UMD Protocol Translator
NOTE: A Display ID is configured which corresponds to
prevents Virtual GPI data from interfering with the Up/Down timer and Image Video
console data.
Display IDs must be configured when using GPIs.
The serial 3 route configuration would be:
Route Number
1
Since the Image Video protocol stream provides its own addressing, no display ID
need be configured.
4.8.3.4. Example 4
Suppose we have:
•
A TSL console configured to send output to address 1 is connected to serial port 1
•
A PPV, configured to receive Image Video data over serial, connected to serial port 2
The serial 1 route configuration would be:
Route
Number
1
Since the TSL protocol stream provides its own addressing, no display ID's need
to be configured.
7700PTX-MVP - 20
Outgoing Port
Eth1
Outgoing Port Outgoing Sub-Port
Ser2
Revision 1.9
Outgoing Sub-Port
1
Display ID
NO
UMD PID. This
Display ID