Table of Contents
Advertisement
Quick Links
1.
OVERVIEW.......................................................................................................................................... 1
2.
INSTALLATION................................................................................................................................... 3
2.1. CARE AND HANDLING OF OPTICAL FIBER............................................................................ 4
2.1.1. Safety .............................................................................................................................. 4
2.1.2. Assembly......................................................................................................................... 5
2.1.3. Labeling........................................................................................................................... 5
2.1.4. Handling and Connecting Fibers ..................................................................................... 5
3.
SPECIFICATIONS............................................................................................................................... 6
3.1. S-VIDEO INPUT.......................................................................................................................... 6
3.2. ANALOG AUDIO INPUTS .......................................................................................................... 6
3.3. OPTICAL OUTPUT..................................................................................................................... 7
3.4. SYSTEM PERFORMANCE ........................................................................................................ 7
3.5. ELECTRICAL ............................................................................................................................. 7
3.6. COMPLIANCE ............................................................................................................................ 7
3.7. PHYSICAL .................................................................................................................................. 7
4.
STATUS INDICATORS AND DISPLAYS ........................................................................................... 8
4.1. STATUS INDICATOR LEDS....................................................................................................... 8
4.2. DOT-MATRIX DISPLAY ............................................................................................................. 8
4.2.1. Setting the Headphone Jack Channel............................................................................. 9
4.2.2. Displaying the Video Standard ........................................................................................ 9
5.
CARD EDGE MENU SYSTEM .......................................................................................................... 10
5.1. NAVIGATING THE MENU SYSTEM......................................................................................... 10
5.2. TOP LEVEL MENU STRUCTURE ............................................................................................ 10
5.3. SETTING THE VIDEO CONTROLS.......................................................................................... 11
5.3.1. Setting the Cable Equalization ...................................................................................... 11
5.4. SETTING THE AUDIO CONTROLS ......................................................................................... 11
5.4.1. Configuring Audio Presence Detection ......................................................................... 11
5.4.1.1. Procedure to Calibrate Audio Presence Detection ......................................... 12
5.5. CHANGING THE ORIENTATION OF THE TEXT ON THE DISPLAY....................................... 12
5.6. RESTORING THE FACTORY SETTINGS................................................................................ 12
6.
CARD EDGE CONTROLS ................................................................................................................ 13
6.1. MONITORING THE AUDIO ...................................................................................................... 13
7707CVT-2-SV S-Video and Analog Audio Fiber Transmitter
TABLE OF CONTENTS
Revision 0.2
7700 MultiFrame Manual
Advertisement
Table of Contents
Related Manuals for evertz 7700
Summary of Contents for evertz 7700
-
Page 1: Table Of Contents
7700 MultiFrame Manual 7707CVT-2-SV S-Video and Analog Audio Fiber Transmitter TABLE OF CONTENTS OVERVIEW............................1 INSTALLATION........................... 3 2.1. CARE AND HANDLING OF OPTICAL FIBER................4 2.1.1. Safety ..........................4 2.1.2. Assembly......................... 5 2.1.3. Labeling........................... 5 2.1.4. Handling and Connecting Fibers ..................5 SPECIFICATIONS.......................... - Page 2 7700 MultiFrame Manual 7707CVT-2-SV S-Video and Analog Audio Fiber Transmitter JUMPERS............................14 7.1. SELECTING WHETHER LOCAL FAULTS WILL BE MONITORED BY THE GLOBAL FRAME STATUS ..................14 7.2. SELECTING WHETHER MODULE WILL BE CONTROLLED FROM THE LOCAL CONTROLS OR THROUGH THE V LINK INTERFACE ........
- Page 3 ® Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor for the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning performance of Evertz products are for informational use only and are not warranties of future performance, either expressed or implied.
- Page 4 7700 MultiFrame Manual 7707CVT-2-SV S-Video and Analog Audio Fiber Transmitter Never look directly into an optical fiber. Non-reversible damage to the eye can occur in a matter of milliseconds. Do not hook up the 7707CVT series DWDM cards and any 7707CVR series cards directly with a short fiber optic cable.
-
Page 5: Overview
7700 MultiFrame Manual 7707CVT-2-SV S-Video and Analog Audio Fiber Transmitter OVERVIEW The 7707CVT-2-SV is a VistaLINK enabled, S-Video and analog audio fiber transmitter for broadcast ® quality video and audio signals. This single card module accepts one S-Video dual channel inputs (luminance and color-Y/C) with up to four analog audio inputs, performs analog to digital conversion and transmits them over a single fiber. -
Page 6: Figure 1-1: 7707Cvt-2-Sv Block Diagram
7700 MultiFrame Manual 7707CVT-2-SV S-Video and Analog Audio Fiber Transmitter Features: • Single card slot including fiber optic converter • Supports both NTSC and PAL video • Broadcast quality S-Video and Audio performance • Superior digital data transmission methods •... -
Page 7: Installation
7700 MultiFrame Manual 7707CVT-2-SV S-Video and Analog Audio Fiber Transmitter INSTALLATION The 7707CVT-2-SV comes with a companion rear plate that has two BNC connectors, one twelve pin terminal header with removable terminal block and one SC/PC, SC/PC with cover flap, ST/PC or FC/PC optical connector. -
Page 8: Care And Handling Of Optical Fiber
7700 MultiFrame Manual 7707CVT-2-SV S-Video and Analog Audio Fiber Transmitter S-VIDEO IN: The 7707CVT-2-SV has two BNC inputs, Luma and Chroma. The inputs provide equalization compensation for up to approximately 300m of industry standard Belden 1694 coaxial cable. NOTE: Video equalization set for Luma and Chroma must be configured to the same values. -
Page 9: Assembly
7700 MultiFrame Manual 7707CVT-2-SV S-Video and Analog Audio Fiber Transmitter 2.1.2. Assembly Assembly or repair of the laser sub-module is done only at Evertz facility and performed only by qualified Evertz technical personnel. 2.1.3. Labeling Certification and Identification labels are combined into one label. As there is inadequate space on the product to place the label, it is reproduced here in the manuals. -
Page 10: Specifications
7700 MultiFrame Manual 7707CVT-2-SV S-Video and Analog Audio Fiber Transmitter SPECIFICATIONS 3.1. S-VIDEO INPUT Standards: NTSC, SMPTE 170M, PAL, ITU-R 624-4 Number of Inputs: 2 (1 Luma, 1 Chroma) Connector: BNC per IEC 61169-8 Annex A. Signal Quantization: 10 bits System Bandwidth: 5.5MHz... -
Page 11: Optical Output
LN No. 50, dated July 26, 2001 Complies with IEC 60825-1, Am. 2 EMI/RFI: Complies with FCC regulations for class A devices Complies with EU EMC directive 89/336/EEC 3.7. PHYSICAL 7700 or 7701 frame mounting: Number of slots: 7707CVT-2-SV-7 Revision 0.2... -
Page 12: Status Indicators And Displays
7700 MultiFrame Manual 7707CVT-2-SV S-Video and Analog Audio Fiber Transmitter STATUS INDICATORS AND DISPLAYS The 7707CVT-2-SV has 6 LED Status indicators and a 4 digit alphanumeric display on the front card edge to show operational status of the card at a glance. The card edge pushbutton and toggle switch are used to select various displays on the alphanumeric display. -
Page 13: Setting The Headphone Jack Channel
7700 MultiFrame Manual 7707CVT-2-SV S-Video and Analog Audio Fiber Transmitter The following display messages indicate what is being displayed: Set Headphone Jack Audio Channel AJCK Video Standard in Use VSTD The details of the each of the displays are described in the section 4.2.1 and 4.2.2. -
Page 14: Card Edge Menu System
7700 MultiFrame Manual 7707CVT-2-SV S-Video and Analog Audio Fiber Transmitter CARD EDGE MENU SYSTEM 5.1. NAVIGATING THE MENU SYSTEM While in control mode, the toggle switch and pushbutton are used to navigate through a menu system to set various parameters for the module. To enter the menu system, press the pushbutton one or more times to exit the current display mode and return to the mode select menu item. -
Page 15: Setting The Video Controls
7700 MultiFrame Manual 7707CVT-2-SV S-Video and Analog Audio Fiber Transmitter 5.3. SETTING THE VIDEO CONTROLS 5.3.1. Setting the Cable Equalization The EQ1 control is used to set the amount of cable equalization being applied at the video 1 Input (Luma). It can be adjusted to compensate for various input cable lengths to achieve a flat frequency curve. -
Page 16: Procedure To Calibrate Audio Presence Detection
7700 MultiFrame Manual 7707CVT-2-SV S-Video and Analog Audio Fiber Transmitter DUR1 The DUR control sets the amount of time (in seconds) the audio is below 1 to 20 the level set by the LVL control before the audio is considered missing. -
Page 17: Card Edge Controls
7700 MultiFrame Manual 7707CVT-2-SV S-Video and Analog Audio Fiber Transmitter CARD EDGE CONTROLS The 7707CVT-2-SV is equipped with a three position, return to center toggle switch which is used to select the various card-edge displays and menu items and is also used in conjunction with a momentary pushbutton to select some sub-items of the menu system. -
Page 18: Jumpers
7700 MultiFrame Manual 7707CVT-2-SV S-Video and Analog Audio Fiber Transmitter JUMPERS Several jumpers, located at the front of the module are used to preset various operating modes. Figure 7-1 shows the location of the card edge controls, status indicators and jumpers. -
Page 19: Selecting Whether Module Will Be Controlled From The Local Controls Or Through The
7700 MultiFrame Manual 7707CVT-2-SV S-Video and Analog Audio Fiber Transmitter 7.2. SELECTING WHETHER MODULE WILL BE CONTROLLED FROM THE LOCAL CONTROLS OR THROUGH THE V LINK INTERFACE ISTA ® The MASTER jumper J6 selects whether the module will be controlled from the local user controls or through the VistaLINK interface. -
Page 20: Vistalink Remote Monitoring/Control
1. An SNMP manager, also known as a Network Management System (NMS), is a computer running special software that communicates with the devices in the network. Evertz VL-Fiber demo Manager graphical user interface (GUI), third party or custom manager software may be used to monitor and control Evertz VistaLINK enabled fiber optic products. -
Page 21: Vista Link ® Monitored Parameters
7700 MultiFrame Manual 7707CVT-2-SV S-Video and Analog Audio Fiber Transmitter 8.2. LINK MONITORED PARAMETERS ISTA ® The following parameters can be remotely monitored through the VistaLINK interface: ® Parameter Description Indicates whether laser is operating without functional Laser OK problems. -
Page 22: Vista Link ® Controlled Parameters
7700 MultiFrame Manual 7707CVT-2-SV S-Video and Analog Audio Fiber Transmitter 8.3. LINK CONTROLLED PARAMETERS ISTA ® The following parameters can be remotely controlled through the VistaLINK interface: ® Parameter Description A range of values describing equalization being applied at the Video A PreEQ Video A input. -
Page 23: Vista Link Traps
7700 MultiFrame Manual 7707CVT-2-SV S-Video and Analog Audio Fiber Transmitter 8.4. LINK TRAPS ISTA ® The following parameters can be remotely monitored through the VistaLINK interface as trap statuses in ® the configuration View and traps in the Alarm View. - Page 24 7700 MultiFrame Manual 7707CVT-2-SV S-Video and Analog Audio Fiber Transmitter This page left intentionally blank 7707CVT-2-SV-20 Revision 0.2...
Need help?
Do you have a question about the 7700 and is the answer not in the manual?
Questions and answers