The installation is complete.
Installing an E3.S drive
About this task
CAUTION: A discharge of static electricity from a finger or other conductor might damage system boards or other
static-sensitive devices. To prevent damage, observe antistatic precautions.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated
with either a component or a blank.
Procedure
1. Back up all server data.
2. If installed, remove the front bezel.
3. Remove the drive blank.
Retain the blank for future
use.
4. Prepare the drive.
5. Install the drive.
Hardware options installation
90