Table of Contents
Advertisement
Retain the screws and bracket. These screws will be used to secure the new NS204i + secondary low-profile riser cage
bracket.
10. Install the following options:
Low-profile expansion card
•
NS204i-u Boot Device
•
11. If the boot device is not install in the riser cage, or to prevent hot-plug access to the SSDs on the boot device, install the
security cover.
12. Install the NS204i-u + secondary low-profile riser cage:
a. Carefully press the riser down on its system board connector (callout 1).
Make sure that:
Hardware options installation
121
Advertisement
Table of Contents
