Ricoh Pro C5110 Series Manual page 184

9. Troubleshooting
Message
"The selected paper type is
not supported. This job has
been cancelled."
"Z-fold error."
When there is a problem with the print settings
Message
"Booklet/Half Fold Error"
"Classification Code is
incorrect."
"Classification Code is
incorrect."
"Duplex has been
cancelled."
176
Causes
Job reset is automatically
performed if the specified
paper type is incorrect.
Z-folding was canceled.
Causes
The job was canceled
because you specified
invalid settings for saddle
stitching or half fold.
The classification code has
not been entered, or the
classification code has
been entered incorrectly.
The classification code is
not supported with the
printer driver.
Duplex printing was
canceled.
Solutions
Specify the correct paper type, and
then print the file again.
Check the tray, paper orientation, print
orientation, and Z-fold settings again.
Solutions
Check the settings for saddle stitching or
half fold.
Enter the correct classification code.
Select [Optional] for classification code.
For details about how to specify
classification code settings, see
"Configuring Classification Codes", Print
.
• Select the proper paper size for the
duplex function. For details about
paper, see "Specifications for the
Main Unit", Maintenance and
Specifications .
• Change the setting for "Apply
Duplex" in [Tray Paper Settings] to
enable duplex printing for the paper
tray. For details about setting "Apply
Duplex", see "Tray Paper Settings",
Paper Settings .