Configuring The Ipsec Policy - Ricoh SP C240SF Operating Instructions Manual

8. Configuring the Machine Using Web Image Monitor
• For details about which ICMP message types will be bypassed when setting [All ICMP Bypass] to
[Inactive], see Web Image Monitor Help.

Configuring the IPsec Policy

Click the [IPsec Policy List] tab on the IP security settings page to display the list of registered IPsec
policies.
Item
No.
Name
Address Settings
8
Action
Status
To configure IPsec policies, select the desired IPsec policy, and then click [Change] to open the "IPsec
Policy Settings" page. The following settings can be made on the "IPsec Policy Settings" page.
340
IPsec policy number.
Displays the name of the IPsec policy.
Displays the IP address filter of the IPsec policy as below:
Remote address/Prefix length
Displays the action of the IPsec policy as "Allow", "Drop", or "Require
Security".
Displays the status of the IPsec policy as "Active" or "Inactive".
Description