Table of Contents
Advertisement
HD9625DSK Instruction Manual
2.4.6. PSU STATUS
When the LED is on it indicates that the associated power supply is plugged in and the 12V DC main
is functioning.
2.4.7. PROGRAM BUS
BKG/A LED ON indicates the program output is set to HD INPUT BGND/A
FILL/B LED ON indicates the program output is set to HD INPUT FILL/B
DSK LED ON indicates the program output is set to HD INPUT BGND/A and FILL/B
2.4.8. PGM BUS LOCK
Indicates that the panel is locked. In this state all front panel buttons are disabled except for the panel
lock button.
2.4.9. BYPASS
Indicates that the unit is in bypass mode i.e. the program video is passing directly through the bypass
relay to the bypass video output BNC
Page 2-8
HD9625DSK Hardware
Revision 2.1.2
Advertisement
Table of Contents
