Table of Contents
Advertisement
HD9625DSK Instruction Manual
You can also consult the FTP site (http://www.evertz.com/ftp.html) on our web page for the latest
patches, upgrades and lists of Frequently Asked Questions.
The DCP instructions are included in section 4 of this manual. The DCP is optional and only ships with
orders purchased with this option. DCP stands for Desktop Control Panel. Please refer to that
document for button descriptions as it replaces section 2.4 of this manual. The DCP option is not field
upgradeable, if you wish to operate the unit with the DCP option, and you did not specify this at the
time you placed your order, you will be required to send your unit back to the factory for a retrofit.
1.3.
FIRST TIME SETUP
1.3.1. Rear Panel Hook Up
Figure 1-1: HD9625DSK Rear Panel
Connect the incoming video to the HD Input BGND/A, input BNC connector for HD serial digital
SMPTE 292M video. A video signal should be supplied prior to applying power to the box.
Connect the main HD serial digital video output, HD Output PROGRAM to the next device in the video
path. There are 2 BNC connectors to output program video compatible with SMPTE 292M video. One
output is wired as a bypass output and will provide video pass through in the event of power loss to
the unit.
The BYPASS output is the only output BNC that is connected to the bypass relay. This output will be
connected to the program input in the event of a power failure or a bypass command as issued from
the front panel button press. This is labeled as BYPASS on the rear panel.
The UPGRADE RS232 is an RS-232 serial interface used for updating firmware in the HD9625DSK
model. Connect this using a standard 9pin straight through serial cable, to the PC. Automation control
will be available on the DB9 connector labeled SERIAL CONTROL providing automatic control of the
unit.
The HD9625DSK has a universal power supply that operates on either 115 Volt / 60 Hz or 230 Volt /
50 Hz AC. The power supply auto switches between the voltages. A second redundant power supply
purchase option operates in conjunction with the original power supply.
Items of special note are indicated with a double box like this.
Page 1-2
OVERVIEW
Revision 2.1.2
Advertisement
Table of Contents
