Table of Contents
Advertisement
7
Align the connectors of the replacement drive as shown A on the bracket. Then insert the re-
placement drive
with a torque of 0.35 N·m.
8
Insert the bracket with the replacement drive into the correct bay of the Panel PC.
Ensure the bracket is completely in the Panel PC with an extra push.
The drive bracket will lock into place when it is fully inserted.
NY-series Industrial Panel PC Hardware User's Manual (W557)
1
in the bracket and insert the 4 mounting screws
2
. Tighten these screws
A
7 Maintenance
7
7-15
Advertisement
Table of Contents
