Id Information Label - Omron sysmac NY532-1 00-111 13 0 Series Hardware User Manual

1-3

ID Information Label

The ID information label contains relevant information about the IPC Machine Controller.
The following example will be different from your product label.
A B
PRODUCT NAME
Ver. .
Corporation Kyoto, 600-8530 JAPAN
H G F
Item
A Product name
B
Model
C Power rating
D Custom ID
(Optional)
E Standards and QR
code
F Unit Ver.
G LOT number and
serial number
H
MAC ADDRESS
*1. Refer to 1-4 Product Configuration on page 1-6 for model details.
*2. Refer to 4-2-4 Ethernet Connector Specifications on page 4-14 for Ethernet specifications.
Additional Information
Refer to 3-1-1 Front and Top of the Industrial Panel PC on page 3-2 for the ID Information
label location.
NY-series Industrial Panel PC Hardware User's Manual (W557)
C D
CUSTOM ID
MADE IN THE NETHERLANDS
E
Name
IPC Machine Controller
Model and configuration details
*1
Power rating details
A custom ID [NYC£££-££££££££]
Only for Industrial Monitors and Industrial Panel PCs with a custom logo
The applicable standards and a QR code for OMRON internal use
Unit version of the Machine Controller Software
Production details, consisting of:
•
The lot number of the IPC Machine Controller in the format DDMYY£.
DDMYY with Month number 1 to 9 for January to September, X for October, Y
for November, and Z for December.
£: For use by OMRON
•
Serial number (4 digits)
•
PORT 1: the MAC address of Ethernet port 1
*2
•
PORT 2: the MAC address of Ethernet port 2
•
PORT 3: the MAC address of Ethernet port 3
1 Introduction to the Industrial Panel PC
Description
1
*1
.
1-5