Item
G
Option port
5-5-2
Connection Procedure
Use the following procedure to connect the IPC Machine Controller.
Ensure the Panel PC is securely fastened to the mounting surface.
Ensure the mounted Panel PC can be connected to power and peripheral devices. Remove dust cov-
ers where applicable and store them in a safe place.
Additional Information
• Refer to 5-3 Mount on page 5-13 for mounting details.
• Refer to:
• 3-9-4 DVI Cables on page 3-24
• 3-9-5 USB Type-A to USB Type-B Cables on page 3-24
• individual cable specifications
for cable bending requirements and connector clearance.
Use the following procedure to connect the Panel PC:
1
Ensure the ground terminal is connected.
Refer to 5-4-2 Ground on page 5-27 for grounding details.
2
Connect the power connector A .
Hold the black part to enable the auto-locking mechanism.
Do not push the orange sliders B in the direction of the Panel PC because this will unlock the
connector.
NY-series Industrial Panel PC Hardware User's Manual (W557)
Name
Interface connection options for peripheral devices or an additional
monitor:
•
RS-232C connector (default)
•
DVI-D connector
•
NY Monitor Link connector
A
B
5 Installation
Description
5
5-41