Table of Contents
Advertisement
5 Installation
1
Ensure the mounting surface conforms to following requirements.
Standards conformance
IP65
2
Create an opening in the mounting surface.
The table before step 1 gives an overview of the cut out dimensions for the Panel PC.
Prepare a rectangular cut out with the dimensions X1 and Y1.
3
Ensure the mounting surface is clean and not warped.
5-24
Material
Steel
Aluminum
NY-series Industrial Panel PC Hardware User's Manual (W557)
Mounting panel requirements
Thickness 1.6 to 6.0 mm
Thickness 2.5 to 6.0 mm
Advertisement
Table of Contents
