Omron sysmac NY532-1 00-111 13 0 Series Hardware User Manual page 156

5 Installation
3
Connect the I/O connector.
Hold the black part A when inserting the connector, this enables the auto-locking mechanism.
Do not tilt the orange levers B because this will unlock the connector.
4
Connect an external monitor such as the Industrial Monitor.
Connect the monitor to the DVI connector and tighten the fastening screws or use the optional
NYML connector.
For an Industrial Panel PC this is optional because a monitor is integrated.
5
Connect a device to the optional interface (DVI, RS-232C or NYML) if applicable and tighten
the fastening screws when applicable.
6
Connect the USB ports to peripheral devices .
7
Connect the Panel PC to the required Ethernet interface connector(s).
Refer to 5-5-3 Ethernet Connection Procedure on page 5-43 for Ethernet port details.
The Panel PC is connected.
5-42
A
B
NY-series Industrial Panel PC Hardware User's Manual (W557)