Table of Contents
Advertisement
Appendices
A-1-6
BIOS - Security
Provides security information like BIOS Password and HDD information.
Security setting adjustments should only be performed by the engineer
in charge that possesses a thorough understanding of the security set-
tings. Selecting non-recommended security settings can put your sys-
tem at risk.
Changeable BIOS Security parameters and their factory default values:
BIOS Password
BIOS Lock
HDD Security
Configuration
Secure Boot Menu
A-1-7
BIOS - Save & Exit
Provides the possibility to leave the BIOS with or without saving changes.
Save & Exit Parameters: Disabled.
• Save Changes and Exit
Changed settings are saved and the Operating System starts with the changed settings.
• Discard Changes and Exit
Changed settings are not saved and the Operating System starts with the unchanged settings.
• Save Changes and Reset
Changed settings are saved and the Panel PC restarts using the changed settings.
• Discard Changes and Reset
Changed settings are not saved and the Panel PC restarts with the unchanged settings.
• Save Changes
Changed settings are saved and the BIOS setup stays open.
• Discard Changes
Changed settings are reverted to their last saved values and the BIOS setup stays open.
• Restore Defaults
Revert all BIOS settings to factory default.
A-10
WARNING
Item
Diskname
Secure Boot
Secure Boot Mode
Key Management
NY-series Industrial Panel PC Hardware User's Manual (W557)
Default Key Provision
Platform Key (PK)
Key Exchange Key (KEK)
Authorized Signatures
Forbidden Signatures
Authorized TimeStamps
Default / Remark
Empty
Enabled
Display disk parameters
Disabled
Custom
Disabled
NOT INSTALLED
NOT INSTALLED
NOT INSTALLED
NOT INSTALLED
NOT INSTALLED
Advertisement
Table of Contents
