Table of Contents
Advertisement
Installation instructions
•
•
•
WD-153 - WD-423
Now fit the stainless clamp strips (F) to the interior of the machine above
the join between the sections. Apply silicone to the strips before fitting them
into place. Fit the strips in the following arrangement: 1- upper strip, 2 - low-
er strip, 3 - rear strip.
Finally, fit the curtain rail (G) This must be screwed firmly into the middle of
the oval hole.
Assemble the drain (H).
15
optiflow
Rev. 00 (202310)
Advertisement
Table of Contents
