Installation instructions
•
•
•
•
•
WD-153 - WD-423
Fitting the door seal to the electrical cabinet. Place the door seal
(WD400277.31) in the cable channel. This seals the hole for the door
switch and photocell cable.
The wiring must be positioned and anchored in the designated places for
this.
Check all couplings against the machine's wiring diagram!
Switch on the wiring for washing pump M1, the cables are labelled in ac-
cordance with the image.
Connect the wiring for the door switches to the terminals in accordance
with the labelling.
18
optiflow
Rev. 00 (202310)