Table of Contents
Advertisement
Installation instructions
Assembling the divided machine (optional)
Parts which must be assembled are prepacked inside each section together with
the necessary bolts, nuts, etc.
•
•
•
•
•
•
WD-153 - WD-423
Dismantle the lower cover plates (on the front side) beside the pre-wash
and chemical wash.
Remove the lower rear cover plate beside the chemical wash.
Fit the support rails (C) to the lower bars, front and rear.
Feed through the hose at (D) and (E) on the image.
Fit the coupling supplied to the hose.
Feed through the electricity cables in the designated places.
13
optiflow
Rev. 00 (202310)
Advertisement
Table of Contents
