Table of Contents
Advertisement
Installation instructions
•
Slide the two sections towards each other, but do not close completely.
There must be enough space to allow silicone to be applied around all
openings.
•
Apply silicone around all screw holes and other openings on both sections.
•
Slide the parts together, hold these in place using clamps and fit any
screws and nuts.
•
Check with a spirit level that the machine is standing level.
•
Wipe away any silicone that may have leaked out.
WD-153 - WD-423
optiflow
14
Rev. 00 (202310)
Advertisement
Table of Contents
