Assembly; First Steps - BRAND Dispensette S Operating Manual

4 Assembly

4.1 First Steps

Follow the safety instructions
> Wear protective clothing, eye protection and protective gloves!
> Always wear protective gloves when touching the instrument or the bottle, especially
when using dangerous liquids.
> Follow all safety instructions and comply with the limitations of use, see Limitations
of Use, p. 52.
> Comply with the operating limitations, see Operating limitations, p. 52.
1. Installing the filling tube/recirculation tube
1
2. Mounting and aligning the instrument on a bottle
To avoid tipping over, use a bottle stand for small bottles.
2
997490
WARNING
a.
Adjust the length of the telescoping filling tube to the
bottle height and attach it.
b.
Center and attach the filling tube (part with smaller di-
ameter) carefully to avoid damaging the nozzle.
ð
If a discharge tube with a recirculation valve is used, the
recirculation tube must also be installed.
c.
Insert the recirculation tube with the opening pointing
outward.
NOTICE
a.
Screw the instrument (GL 45 threads) onto the reagent
bottle, and then align the discharge tube with the bottle
label. This is done by rotating the valve block with the
discharge tube.
4 Assembly
59
Operating manual