Priming - BRAND Dispensette S Operating Manual

4 Assembly
3. Transporting the instrument
The scope of delivery includes bottle adapters made of polypropylene (PP). These may be used only
for media that do not attack PP. Alternatively, ETFE/PTFE bottle adapters can be used (Accessories/
spare parts, p. 82). The user must review carefully to ensure the suitability of ETFE/PTFE bottle
adapters.
3

4.2 Priming

Follow during every use, especially with hazardous media
> Wear protective clothing, eye protection and appropriate hand protection!
> Never press down the piston when the screw cap is screwed on!
> Avoid splashing the reagent!
> To avoid splashes dispense slowly.
> Liquid may accumulate in the screw cap. Open the screw cap slowly in order to pre-
> Follow all safety instructions and comply with the operating exclusions and limita-
Before using the instrument for the first time, ensure it is rinsed carefully and discard the first few
samples dispensed. Avoid splashes, as ethanol and glycerin residues may be present in the instru-
ment.
60
Operating manual
vent splashing.
tions of use; see Limitations of use, p. 52 and Operating exclusions, p. 52.
NOTICE
a.
For bottles with other thread sizes, select a suitable bot-
tle adapter.
b.
Always wear protective gloves when touching the in-
strument or the bottle, especially when using danger-
ous liquids.
c.
When mounted to a reagent bottle, always carry the in-
strument as shown in the figure.
Template for adapter
An adapter template is available for download at
www.brand.de in the Service section. This can be used to de-
termine thread and adapter sizes. This adapter template for
the respective product can also be found in the on-line shop
https://shop.brand.de in the "Selection Charts" section.
WARNING
NOTICE
NOTICE
997490