Assembly; First Steps - BRAND seripettor Operating Manual

4 Assembly

4.1 First Steps

Follow during every use, especially with hazardous media
> Wear protective clothing, eye protection and appropriate hand protection!
> Never press down the piston when the screw cap is screwed on!
> Avoid splashing the reagent!
> To avoid splashes dispense slowly.
> Liquid may accumulate in the screw cap. Open the screw cap slowly in order to pre-
vent splashing.
> Follow all safety instructions and comply with the operating exclusions and limita-
tions of use; see Limitations of use and Operating exclusions, p. 41.
1. Screwing on the dispensing cartridge
a.
2. Installing the actuating unit
a.
997468
WARNING
a.
Screw dispensing cartridge into valve block.
a.
Open piston lock on the actuating unit.
4 Assembly
45
Operating manual