Table of Contents
Advertisement
III
Installation
The TECHART Noselift System may not be connected to the power supply
before the hydraulic lines are connected.
Work may only be carried out on the hydraulic unit and suspension struts when
they are disconnected and depressurized and with the hydraulic unit switched
off. The hydraulic unit must be secured to prevent it being switched on.
Accordingly, the entire hydraulic unit including control system must be
disconnected from the battery and the connection line must be insulated against
contact with the battery.
All pressure lines and lift cylinders must be depressurized before work is
carried out on the TECHART Noselift System.
The hydraulic unit and lift cylinders can become hot if repeatedly raised and
lowered.
The relevant safety regulations must be complied with when handling hydraulic
fluid.
If the power supply fails, the vehicle drops to the normal level.
Warning! Before disconnecting the power supply (battery), observe the relevant
information supplied by the vehicle manufacturer.
TECHART Version 07
ASSEMBLY INSTRUCTIONS
TECHART Noselift System
Page 10 of 50
Advertisement
Table of Contents
