Table of Contents
Advertisement
4
Notes on hydraulic fluid
The TECHART Noselift System is supplied with hydraulic fluid (separate). After
installing the lift cylinders and hydraulic lines, the TECHART Noselift System must be
used to raise and lower the vehicle at least 10x. The air is forced out of the hydraulic
circuit during this procedure. Then check the fluid level and, if necessary, fill up to the
upper marking of the oil dipstick. Ensure that no foreign objects such as metal
shavings or other contaminants enter the oil reservoir.
If the system is ever removed, the hydraulic line must be disconnected at the lift
cylinder. Only a small quantity of hydraulic fluid then escapes from the line. Collect the
fluid in a suitable clean container. Make sure that the reservoir is resistant to the fluid.
If the hydraulic fluid is reused, it must be filtered using a filter suitable for hydraulic fluid
when it is added to the fluid reservoir. If new fluid is used, the oil fluid must be
disposed of properly.
5
Disposal information
Electronic components and hydraulic components contain both environmentally
harmful and recyclable components.
Dispose of the components in an environmentally friendly and proper manner in
accordance with legal requirements.
TECHART Version 07
ASSEMBLY INSTRUCTIONS
TECHART Noselift System
Page 49 of 50
Advertisement
Table of Contents
