Table of Contents
Advertisement
6
Disconnect 6-pin connector (40) from the
interior lamp.
7
Disconnect pin 1 (brown/blue) from the
6-pin connector (40).
8
Insert blue cable of Y-cable (34) into pin
1 of the 6-pin connector (40).
9
Insert cables of connection line (28) into
the 4-pin connector (35) for the Noselift
switch as follows:
Pin 1 black cable (d)
Pin 2 blue cable (c,
preassembled)
Pin 3 red cable (b)
Pin 4 orange cable (a)
The pin assignment order must be
i
adhered to exactly.
Pin 1 lies next to the "high lug" (see
detailed view).
The connection clips must engage
properly into the connector (35).
TECHART Version 07
ASSEMBLY INSTRUCTIONS
TECHART Noselift System
Fig. 46
Fig. 47
1
2 3 4
Fig. 47
Fig. 48
Page 41 of 50
Advertisement
Table of Contents
