Table of Contents
Advertisement
Measurement of vehicle height at front axle as per Porsche specifications:
From wheel contact area to lower edge of hexagon bolt connecting crossmember to
body.
Measurement of vehicle height at rear axle as per Porsche specifications:
From wheel contact area to positional hole in rear axle side section (between track
eccentric and camber eccentric).
Permissible lateral deviation of vehicle from level position: Max. height difference
between left and right = 5 mm
2
Specifications
Operating voltage 11.5 - 15 Volt DC
Power consumption max. 40 A (activated), < 20 mA (not activated)
Operating temperature -20°C to +75°C
Operating pressure 90 - 120 bar (vehicle dependent)
Weight 5.4 kg empty
Dimensions (L/W/H) 430 mm / 185 mm / 230 mm
3
Maintenance
The TECHART Noselift System is largely maintenance free. However, the following
operations have to be performed regularly:
Check level of hydraulic fluid 2x annually. The fluid level should be between the
upper and lower marking on the oil dipstick.
Check hydraulic lines and connections for damage (e.g. chafing) 1x annually.
Fluid changes are not necessary.
TECHART Version 07
ASSEMBLY INSTRUCTIONS
TECHART Noselift System
Page 48 of 50
Advertisement
Table of Contents
