ACME BLINDER LINE 10 IP User Manual page 24

LED Refresh Rate
Invert Pixel
Wireless
Display Settings
Enter the control menu and select Display Settings, press ENTER. Use the UP/DOWN button
to select Display Invert, Temperature Unit or Language.
Display Invert
Select LED Refresh Rate, press ENTER.
Use UP/DOWN button to select 900Hz, 1000Hz, 1100Hz, 1200Hz,
1300Hz, 1400Hz, 1500Hz, 2500Hz, 4000Hz, 5000Hz, 6000Hz, 10KHz,
15KHz, 20KHz or 25KHz, confirm your selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Invert Pixel, press ENTER.
Use UP/DOWN button to select No or Yes, confirm your selection with
ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Wireless, press ENTER.
Use UP/DOWN button to select Off or On, confirm your selection with
ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Display Invert, press ENTER.
Use UP/DOWN button to select No (display normal) or Yes (display
inverted), confirm your selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
- 23 -