Table of Contents
Advertisement
Available languages
Available languages
The machine is an electro-pneumatic automatic tire changer, to be used with wheels with drop
center featuring weight and dimensions as described in the technical data section.
It is engineered to work effectively on:
1.
Conventional wheels
2.
Reverse rim wheels or wheels without central hole
3.
Run-flat tires with reinforced sidewalls (*)
(*) WARNING :
There are specifically studied procedures for this type of wheels.
It may be difficult and sometimes impossible to clamp and/or demount wheels of
Vintage cars (cars out of production for over 30 years), some types of rally wheels
and non –standardized street wheels.
The machine is heavy duty constructed. It operates with the wheel in a vertical position for bead bre-
aking and horizontal for mounting and demounting tires. All machine movements are controlled by
the operator by means of the pedals.
Each machine carries a plate with its identification and some technical data.
As well as the manufacturer's details, it indicates:
MODEL :
Machine Model ,
Ph :
Number of Phases,
Hz :
Frequency in Hz,
Kw :
Absorbed power in Kw,
V :
power supply voltage in Volts,
S/N :
Machine serial number,
Press :
Operating pressure in Bar,
Weight :
Machine weight,
CE :
EC marking.
WARNING :
It is forbidden to modify or remove the data on the manufacturer's plate.
DESCRIPTION
MANUFACTURER'S LABEL
9
Advertisement
Chapters
Table of Contents
