Configuring The Sip-Based Voice Service On The Web Page - Huawei EchoLife HG8110 Service Manual

Gpon terminal
Table of Contents

Advertisement

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
----End
Result
l
l

3.4.5 Configuring the SIP-based Voice Service on the Web Page

This topic provides an example of how to configure the SIP-based voice service on the Web
page.
Prerequisite
l
l
l
Context
NOTE
Some voice parameters cannot be configured on the Web page but can be configured by importing an XML
configuration file. For details about how to import an XML configuration file, see
the XML Configuration File (on the Web
Procedure
Step 1 Configure parameters of the voice WAN port.
1.
2.
Issue 02 (2011-12-08)
Layer 2 Internet access service: The PPPoE dialup is performed on the PC. After the dialup
is successfully performed, the user can access the Internet.
Layer 3 Internet access service: The PC is configured to obtain the IP addresses
automatically. After the PPPoE dialup is successfully performed on the ONT, the PC can
automatically obtain the IP addresses allocated by the ONT, and the user can access the
Internet.
The Layer 2 service channels between the OLT and ONTs are enabled by running the OLT
commands. For details, see
a GPON ONT (on the OLT
You have established the environment for logging in to the Web page for service
configuration and have successfully logged in to the Web page. For details, see
Locally Logging in to the Web
Two telephone sets must be available and each must be connected to ports TEL1 and TEL2
respectively on the ONT.
In the navigation tree, choose WAN > WAN Configuration.
In the right pane, click New. In the dialog box that is displayed, configure parameters of
the WAN port as follows:
l WAN Connection: Enable
l Service List: VoIP (For configuring the VoIP service, VoIP or a combination containing
VoIP needs to be selected.)
l Mode: Route
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Enabling Layer 2 Service Channels Between an OLT and
CLI).
Interface.
Page).
3 Configuration
3.4.3
3.6.1 Operation Guide on
220

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents