Huawei EchoLife HG8110 Service Manual page 205

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
Issue 02 (2011-12-08)
1. Log in to the Web configuration window.
a. Configure the IP address of the PC network adapter to be in the same network
segment as the IP address of the local maintenance Ethernet port of the ONT
(default: 192.168.100.1).
b. Open the Web browser, and enter the IP address of the local maintenance Ethernet
port of the ONT.
c. On the login window, enter the user name (default: telecomadmin) and password
(default: admintelecom) of the administrator. After the password authentication
is passed, the Web configuration window is displayed.
2. Configure the working mode of a LAN port.
a. In the navigation tree, choose LAN > LAN Port Work Mode. Select the check
box of LAN3 and set LAN3 to work in the Layer 3 mode.
b. Click Apply to apply the configuration.
3. Configure parameters of a WAN port.
a. In the navigation tree, choose WAN > WAN Configuration.
b. In the right pane, click New. In the dialog box that is displayed, configure
parameters of a WAN port as follows:
– WAN Connection: Enable
– Mode: Bridge
– VLAN ID: 30 (The VLAN ID of the ONT must be the same as the user-side
VLAN ID configured on the OLT.)
– 802.1p: 4
– MultiCast VLAN ID: 1000 (The multicast VLAN ID of the ONT must be the
same as the multicast VLAN ID configured on the OLT.)
– Bridge Type: IP_Bridged
– Binding options: LAN3
c. Click Apply to apply the configuration.
4. Enable DHCP replay.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuration
197