Huawei EchoLife HG8110 Service Manual page 220

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
l Wi-Fi service: Set the service port indexes to 5 and 6, SVLAN ID to 400, GEM port ID to
3, and CVLAN ID to 40. Use traffic profile 10.
l U2560 management channel: Set the service port indexes to 7 and 8, SVLAN ID to 500,
GEM port ID to 4, and CVLAN ID to 50. Use traffic profile 11.
huawei(config)#service-port 1 vlan 100 gpon 0/1/1 ont 1 gemport 1 multi-service
user-vlan 10 rx-cttr 8 tx-cttr 8
huawei(config)#service-port 2 vlan 100 gpon 0/1/1 ont 2 gemport 1 multi-service
user-vlan 10 rx-cttr 8 tx-cttr 8
huawei(config)#service-port 3 vlan 200 gpon 0/1/1 ont 1 gemport 2 multi-service
user-vlan 20 rx-cttr 9 tx-cttr 9
huawei(config)#service-port 4 vlan 200 gpon 0/1/1 ont 2 gemport 2 multi-service
user-vlan 20 rx-cttr 9 tx-cttr 9
huawei(config)#service-port 5 vlan 400 gpon 0/1/1 ont 1 gemport 3 multi-service
user-vlan 40 rx-cttr 10 tx-cttr 10
huawei(config)#service-port 6 vlan 400 gpon 0/1/1 ont 2 gemport 3 multi-service
user-vlan 40 rx-cttr 10 tx-cttr 10
huawei(config)#service-port 7 vlan 500 gpon 0/1/1 ont 1 gemport 4 multi-service
user-vlan 50 rx-cttr 11 tx-cttr 11
huawei(config)#service-port 8 vlan 500 gpon 0/1/1 ont 2 gemport 4 multi-service
user-vlan 50 rx-cttr 11 tx-cttr 11
Step 9 Configure the queue scheduling mode.
Use the 3PQ+5WRR queue scheduling. Queues 0-4 adopt the WRR mode, with the weights of
10, 10, 20, 20, and 40 respectively; queues 5-7 adopt the PQ mode.
NOTE
Queue scheduling is a global configuration. You need to configure queue scheduling only once on the OLT, and
then the configuration takes effect globally. In the subsequent phases, you do not need to configure queue
scheduling repeatedly when configuring other services.
huawei(config)#queue-scheduler wrr 10 10 20 20 40 0 0 0
Configure the mapping between queues and 802.1p priorities. Priorities 0-7 map queues 0-7
respectively.
huawei(config)#cos-queue-map cos0 0 cos1 1 cos2 2 cos3 3 cos4 4 cos5 5 cos6 6 cos7
7
For the service board that supports only four queues, the mapping between 802.1p priorities and
queue IDs is as follows: priorities 0 and 1 map queue 1; priorities 2 and 3 map queue 2; priorities
4 and 5 map queue 3; priorities 6 and 7 map queue 4.
Step 10 Save the data.
huawei(config)#save
----End
Configuration File
vlan 100,200,400,500 smart
vlan attrib 100 stacking
port vlan 100,200,400,500 0/19 0
arp proxy enable
interface vlanif 200
arp proxy enable
quit
dba-profile add profile-id 10 type4 max 102400
dba-profile add profile-id 20 type3 assure 30720 max 102400
dba-profile add profile-id 30 type4 max 204800
dba-profile add profile-id 40 type2 assure 30720
ont-lineprofile gpon profile-id 10
tcont 1 dba-profile-id 10
tcont 2 dba-profile-id 20
tcont 3 dba-profile-id 30
Issue 02 (2011-12-08) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuration
212