Huawei EchoLife HG8110 Service Manual page 154

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
l
Issue 02 (2011-12-08)
c. Click Apply to apply the configuration.
4. Save the configuration.
In the navigation tree, choose System Tools > Configuration File. In the right pane,
click Save Configuration to save the configuration.
5. Check the ONT connection status.
In the navigation tree, choose Status > WAN Information. In the right pane,
Status is Connected and the obtained IP address is displayed at IP.
Configure the ONT on the U2000.
Layer 3 route mode is used for connecting the ONT to the upper-layer device. IP addresses
of users' PCs are allocated by the DHCP IP address pool on the ONT. PPPoE auto dialup
is performed on the ONT. Parameters of the WAN port must be configured on the ONT.
The following uses batch configurations of creating a value-added service profile of the
ONT as an example. To configure an ONT, on the GPON ONU tab page, select an ONT,
right-click, and choose Configure Value-Added Service from the shortcut menu.
1. Log in to the NMS (iManager U2000 V100R003C00) and start the FTP service.
2. Configure the value-added service profile of the ONT.
a. From the main menu, choose Configuration > Access Profile Management. In
the navigation tree of the tab page that is displayed, choose PON Profile > ONT
VAS Profile.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuration
146