Huawei EchoLife HG8110 Service Manual page 54

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
Issue 02 (2011-12-08)
Main Topology, double-click the required OLT in the Physical Root navigation tree; or
right-click the required OLT and choose NE Explorer from the shortcut menu.
1. Configuring the Information About the ETH Port of a GPON ONU
a. Choose GPON > GPON Management from the navigation tree.
b. On the GPON ONU tab page, set the filter criteria or click
GPON ONUs.
c. In the information list, right-click the ONT record where Frame, Slot, Port, and
ONU ID are set to 0, 2, 1, and 0 respectively and click the The Ont's UNI Port
Info tab in the lower pane.
d. On the The Ont's UNI Port Info tab page, right-click the record where UNI
Type is set to ETH and UNI ID is set to 1, and choose Modifyfrom the shortcut
menu.
e. In the dialog box that is displayed, set Default VLAN ID to 10.
f. Click OK.
2. Configure a service VLAN on the OLT side.
A service VLAN is the VLAN used for the Internet service.
a. Choose VLAN from the navigation tree.
b. On the VLAN tab page, right-click and choose Add from the shortcut menu.
c. In the dialog box that is displayed, set the parameters.
– VLAN ID: 100
– Type: Smart VLAN
– Attribute: Stacking
d. Click Next. Click the Upstream Port tab and add upstream port 0/19/0 as the
upstream port of the VLAN.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuration
to display the
46