Huawei EchoLife HG8110 Service Manual page 197

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
l
----End
Result
The user can watch program1 on the TV.
Configuration File
vlan 1000 smart
port vlan 1000 0/19 0
dba-profile add profile-id 30 type4 max 61440
ont-lineprofile gpon profile-id 10
tcont 3 dba-profile-id 30
gem add 3 eth tcont 3
mapping-mode vlan
gem mapping 3 2 vlan 30
commit
quit
ont-srvprofile gpon profile-id 10
ont-port eth 4 pots 2 catv 1
port vlan eth 3 30
commit
quit
interface gpon 0/1
port 1 ont-auto-find enable
display ont autofind 1
ont confirm 1 ontid 1 sn-auth 6877687714852900 omci ont-lineprofile-id 10 ont-
srvprofile-id 10
ont confirm 1 ontid 2 sn-auth 6877687714852901 omci ont-lineprofile-id 10 ont-
srvprofile-id 10
ont alarm-profile 1 1 profile-id 1
ont alarm-profile 1 2 profile-id 1
ont port native-vlan 1 1 eth 3 vlan 30
ont port native-vlan 1 2 eth 3 vlan 30
quit
traffic table ip index 10 cir off priority 4 priority-policy tag-In-Package
service-port 5 vlan 1000 gpon 0/1/1 ont 1 gemport 3 multi-service user-vlan 30 rx-
cttr 10
tx-cttr 10
service-port 6 vlan 1000 gpon 0/1/1 ont 2 gemport 3 multi-service user-vlan 30 rx-
Issue 02 (2011-12-08)
huawei(config-btv)#igmp profile profile-name profile0 program-name
program1 watch
16. Configure the multicast users.
Configure users of service ports 5 and 6 as multicast users and bind right profile
profile0 to the service ports.
huawei(config-btv)#igmp policy service-port 5 normal
huawei(config-btv)#igmp policy service-port 6 normal
huawei(config-btv)#igmp user add service-port 5 auth
huawei(config-btv)#igmp user add service-port 6 auth
huawei(config-btv)#igmp user bind-profile service-port 5 profile-name
profile0
huawei(config-btv)#igmp user bind-profile service-port 6 profile-name
profile0
huawei(config-btv)#multicast-vlan 1000
huawei(config-mvlan1000)#igmp multicast-vlan member service-port 5
huawei(config-mvlan1000)#igmp multicast-vlan member service-port 6
huawei(config-mvlan1000)#quit
17. Save the data.
huawei(config)#save
Configure the ONT.
The ONT is connected to the upper-layer device in Layer 2 mode and no configuration is
required.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuration
189