Huawei EchoLife HG8110 Service Manual page 226

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
Procedure
Step 1 Configure the working mode of a LAN port.
1.
2.
Step 2 Configure parameters of a WAN port.
1.
2.
Issue 02 (2011-12-08)
In the navigation tree, choose LAN > LAN Port Work Mode. Select the check box of
LAN 1 and set LAN1 to work in the Layer 3 mode.
Click Apply to apply the configuration.
In the navigation tree, choose WAN > WAN Configuration.
In the right pane, click New. In the dialog box that is displayed, configure parameters of a
WAN port as follows:
l WAN Connection: Enable
l Service List: INTERNET (For configuring the Internet access service, INTERNET or
a combination containing INTERNET needs to be selected.)
l Mode: Route
l VLAN ID: 10 (The VLAN ID of the ONT must be the same as the user-side VLAN ID
configured on the OLT.)
l 802.1p: 1
l IP Acquisition Mode: PPPoE
l NAT: Enable (NAT must be enabled to configure the Internet access service.)
l User Name: iadtest@pppoe, Password: iadtest (The user name and password must be
the same as the user name and password configured on the BRAS.)
l Binding options: LAN1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuration
218