Huawei EchoLife HG8110 Service Manual page 214

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
Flow Chart
Table 3-11
the GPON ONT:
Figure 3-7 Flow chart
Procedure
Step 1 Create SVLANs and add an upstream port to them.
The VLAN type is Smart and the VLAN IDs are 100, 200, 400 and 500, VLAN 100 is for HSI
service; VLAN 200 is for VoIP service; VLAN 400 is for Wi-Fi service and VLAN 500 is for
the U2560 management channel. The VLAN for the Internet access service is a stacking VLAN.
Add the upstream port 0/19/0 to the VLAN.
huawei(config)#vlan 100,200,400,500 smart
huawei(config)#vlan attrib 100 stacking
huawei(config)#port vlan 100,200,400,500 0/19 0
Step 2 Enables ARP proxy.
For different users of the same SVLAN, because the service ports of the smart VLAN are isolated
from each other, the voice media streams cannot interchange normally. Therefore, the ARP
proxy function of the OLT needs to be enabled.
Issue 02 (2011-12-08)
shows the flow chart for enabling Layer 2 service channels between the OLT and
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuration
206