Huawei EchoLife HG8110 Service Manual page 234

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3.
Step 3 Configure parameters of the H.248-based voice users.
1.
2.
3.
Issue 02 (2011-12-08)
NOTE
l The parameters of the H.248-based voice interface must be consistent with the corresponding
configuration on the media gateway controller (MGC).
l If dual-homing is configured, MGC Address below Secondary Server must be configured.
l MID Format can be set to Domain Name, IP, or Device. If MID Format is set to Domain Name
or Device, the setting must be consistent with the corresponding configuration on the MGC.
l Domain Name is ONT's domain name registered on the MGC. It is globally unique. Domain
Name in this example is ONT's SN.
l If Media Port is empty, the parameter value is the same as Signaling Port. The media streams are
not isolated from signaling streams. If the upper-layer network requires isolation of media streams
from signaling streams, create different traffic streams for the media streams and signaling streams
on the OLT, create different WAN ports on the ONT, and bind the created WAN ports to Media
Port and Signaling Port.
l Profile Index can be set to Default, BT, FT, KPN, PCCW, ZTE, or BELL. Choose the value based
on the MGC type. Profile Index is set to Default (indicating interconnection with Huawei MGC) in
this example. If the settings do not meet requirements, configure UserDefine. For details about how
to configure this parameter, contact Huawei technical support.
Click Apply to apply the configuration.
In the navigation tree, choose Voice > VoIP User Configuration.
In the right pane, configure the parameters of voice user 1 as follows:
l Line Name: A0
l Associated POTS: 1 (binding port TEL1 on the ONT)
l Select Enable Line Name to enable the voice user configuration.
Click Apply to apply the configuration.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuration
226