Huawei EchoLife HG8110 Service Manual page 202

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
Issue 02 (2011-12-08)
Ont SN
Password
VenderID
Ont Version
Ont SoftwareVersion : V1R002C06
Ont EquipmentID
Ont autofind time
---------------------------------------------------------------------
---
huawei(config-if-gpon-0/1)#ont confirm 1 ontid 1 sn-auth
6877687714852900 omci ont-lineprofile-id 10 ont-srvprofile-id 10
huawei(config-if-gpon-0/1)#ont confirm 1 ontid 2 sn-auth
6877687714852901 omci ont-lineprofile-id 10 ont-srvprofile-id 10
NOTE
If multiple ONTs of the same type are connected to a port and the same line profile or service
profile is bound to the ONTs, you can add ONTs in batches by confirming the auto discovered
ONTs in batches to simplify the operation and increase the configuration efficiency. For
example, the preceding command can be modified as follows:
huawei(config-if-gpon-0/1)#ont confirm 1 all sn-auth omci ont-
lineprofile-id 10 ont-srvprofile-id 10
c. (Optional) Bind an alarm profile to the ONT.
In this example, bind the default alarm profile, namely alarm profile 1 to the
ONT.
huawei(config-if-gpon-0/1)#ont alarm-profile 1 1 profile-id 1
huawei(config-if-gpon-0/1)#ont alarm-profile 1 2 profile-id 1
5. Confirm that the ONT goes online normally.
After an ONT is added, run the display ont info command to query the current status
of the ONT. Ensure that Control flag of the ONT is active, Run State is online,
Config state is normal, and Match state is match.
huawei(config-if-gpon-0/1)#display ont info 1 1
---------------------------------------------------------------------
F/S/P
0/1/1
ONT-ID
1
Control flag
activated.
Run state
normally.
Config state
of the
Match state
bound to
actual capability
...//The rest of the response information is omitted.
If the ONT state fails, the ONT fails to be in the up state, or the ONT does not match,
check the ONT state by referring to the above-mentioned descriptions.
– If Control flag is deactive, run the ont activate command in the GPON port mode
to activate the ONT.
– If the ONT fails to be in the up state, that is, Run state is offline, the physical line
may be broken or the optical transceiver may be damaged. You need to check both
the material and the line.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: 6877687714852901
:
: HWTC
: 120D0010
: 247
: 2010-12-10 14:59:12
:
:
: active //Indicates that the ONT is
: online //Indicates that the ONT goes online
: normal //Indicates that the configuration status
ONT is normal.
: match //Indicates that the capability profile
the ONT is consistent with the
of the ONT.
3 Configuration
194