Huawei EchoLife HG8110 Service Manual page 161

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
Issue 02 (2011-12-08)
– Service profile: A service profile provides the service configuration channel for
the ONT that is managed through OMCI.
– Alarm profile: An alarm profile contains a series of alarm thresholds to measure
and monitor the performance of activated ONT lines. When a statistical value
reaches the threshold, the host is notified and an alarm is reported to the log host
and the NMS.
a. Configure a DBA profile.
Run the display dba-profile command to query the existing DBA profiles in the
system. If the existing DBA profiles in the system do not meet the requirement,
run the dba-profile add command to create a DBA profile.
Set the DBA profile ID to 20, type to Type3, assured bandwidth to 15 Mbit/s,
and maximum bandwidth to 30 Mbit/s.
huawei(config)#dba-profile add profile-id 20 type3 assure 15360 max
30720
b. Configure an ONT line profile.
Create GPON ONT line profile 10 and bind T-CONT 2 to DBA profile 20.
huawei(config)#ont-lineprofile gpon profile-id 10
huawei(config-gpon-lineprofile-10)#tcont 2 dba-profile-id 20
Create GEM port 2 for carrying traffic streams of the ETH type and bind GEM
port 2 to T-CONT 2. Set the QoS mode to priority-queue (default).
NOTE
a. To change the QoS mode, run the qos-mode command to configure the QoS mode to gem-
car or flow-car, and run the gem add command to configure the ID of the traffic profile
bound to the GEM port.
b. When the QoS mode is PQ, the default queue priority is 0; when the QoS is flow-car,
traffic profile 6 is bound to the port by default (no rate limitation); when the QoS mode is
gem-car, traffic profile 6 is bound to the port by default (no rate limitation).
huawei(config-gpon-lineprofile-10)#gem add 2 eth tcont 2
Configure the mapping between the GEM port and the ONT-side service to the
VLAN mapping mode (default) and map the service port of CVLAN 20 to GEM
port 2.
huawei(config-gpon-lineprofile-10)#mapping-mode vlan
huawei(config-gpon-lineprofile-10)#gem mapping 2 1 vlan 20
After the configurations are complete, run the commit command to make the
configured parameters take effect.
huawei(config-gpon-lineprofile-10)#commit
huawei(config-gpon-lineprofile-10)#quit
c. Configure an ONT service profile.
The number of ports configured in the service profile must be the same as the
actual number of ONT ports. The flowing table lists the port capabilities
ofHG8010/HG8110/HG8240/HG8245/HG8247/HG8447. The HG8247 is used
as an example.
Product
HG8010
HG8110
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Number of Number of
ETH Ports POTS Ports
1 -
1 1
3 Configuration
Number of
CATV Ports
-
-
153