Disassembly; Removing And Replacing The Battery Door And Battery - Motorola MOTOKRZR K3 Service Manual

Hide thumbs Also See for MOTOKRZR K3:

Table of Contents

Disassembly

The procedures in this section provide instructions for the disassembly of K3

telephones. Tools and equipment used for the phone are listed in Table 1, preceding.

Many of the integrated devices used in this equipment are vulnerable to damage

from electrostatic discharge (ESD). Ensure adequate static protection is in place

when handling, shipping, and servicing the internal components of this equipment.

Avoid stressing the plastic in any way to avoid damage to either the plastic or

internal components.

All batteries can cause property damage and/or bodily injury, such as, burns if a

conductive material, such as, jewelry, keys, or beaded chains touch exposed termi-

nals. The conductive material may complete an electrical circuit (short circuit) and

become quite hot. Exercise care in handling any charged battery, particularly when

placing it inside a pocket, purse, or other container with metal objects.

Ensure the phone is turned off.

Press in the battery door latch, as shown in Figure 1.

Battery door

Figure 1. Removing the Battery Door

Slide the battery door forward and lift it completely off the phone.

February 02, 2007

Battery door latch

065317o

6809509A88-O

Table of Contents