Table of Contents
Advertisement
HIGH VOLTAGE
USE CAUTION IN HIGH VOLTAGE AREAS. DO NOT assume the
power to be off.
FOLLOW PROPER LOCKOUT PROCEDURES.
EMERGENCY STOP BUTTON
In the event of incorrect operation or dangerous conditions, the machine
can be stopped immediately by pressing the E-STOP button. Twist the
emergency stop button clockwise (cw) to reset. Note: Resetting the E-
Stop will not start the machine.
SAFETY PRECAUTIONS
Metal working can be dangerous if safe and proper operating procedures are not followed. As
with all machinery, there are certain hazards involved with the operation of the product. Using
the machine with respect and caution will considerably lessen the possibility of personal injury.
However, if normal safety precautions are overlooked or ignored, personal injury to the operator
may result.
Safety equipment such as guards, hold-downs, safety glasses, dust masks and hearing
protection can reduce your potential for injury. But even the best guard won't make up for poor
judgment, carelessness or inattention. Always use common sense and exercise caution in
the workshop. If a procedure feels dangerous, don't try it.
REMEMBER: Your personal safety is your responsibility.
WARNING:
SERIOUS PERSONAL INJURY
•
All Baileigh machines should be used only for their intended use.
•
Baileigh does not recommend or endorse making any modifications or alterations to a
Baileigh machine. Modifications or alterations to a machine may pose a substantial risk of
injury to the operator or others and may do substantial damage to the machine.
•
Any modifications or alterations to a Baileigh machine will invalidate the machine's warranty.
FAILURE TO FOLLOW THESE RULES MAY RESULT IN
Dear Valued Customer:
6
6
Advertisement
Table of Contents
