Table of Contents
Advertisement
18. DO NOT touch live electrical components or parts.
19. Turn off power before checking, cleaning, or replacing any parts.
20. Be sure all equipment is properly installed and grounded according to national, state, and
local codes.
21. Inspect power and control cables periodically. Replace if damaged or bare wires are
exposed. Bare wiring can kill!
22. DO NOT bypass or defeat any safety interlock systems.
23. Keep visitors a safe distance from the work area.
IMPORTANT: Maximum pressing force can be exerted for a short time only. Do not use
maximum force when the ram is extended further than 3/4 of its length. This can damage the
piston rod.
Maximum force with long stroke
Note: Not observing the maximum working period can result in overheating the
hydraulic oil and heating up the hydraulic unit. The machine can get damaged and the operator
may suffer burns.
Maximum force with short stroke
8
8
Advertisement
Table of Contents
