General Information - Baileigh Industrial HSP-66M-HD Operator's Manual

 Fasteners and Retainers: Make sure that all retaining rings, pins, or fasteners are removed,
and no hidden secondary retainers are present.
 Hidden Objects: Some components house one or more pieces such and springs, retaining
rings, or spacers. Make sure that the part to be dismantled with the press has the applicable
caging system to catch hidden items. Should the workpiece slip or open up when the
retaining ring is removed and the hydraulic pressure is relieved.
 Special Fits: Make sure that interference fits are correct before pressing a part on, and
make sure that the applicable parts have been heated or chilled to the correct temperatures
to avoid galling and seizing. Be aware, that not all parts were designed to be pressed off. If
in doubt, refer to the OEM of the part you are working on.

General Information

The Hydraulic Workshop Press is designed for:
 Bending and straightening of beams, profiles, pivots, shaft etc.
 (dis)assembly of bearings, bushings or pivots
 stamping, punching, forming of wide range of materials
Typical use of press
This machine can be used in repair shops, workshops, etc. To enable more options, the
machine can be equipped with special tools as V-block or an inner table.
22
22