Installation; Location; Free Space Requirements; Installing The Door Handle - Matsui M145CFW17E Instruction Manual

Installation

INSTALLATION

Location

When selecting a position for your unit you should make sure the floor is flat and firm
and the room is well ventilated. This unit can be used in a garage or outbuilding. For
optimum energy efficiency the unit should be located within an average room temperature
of between 10°C and 43°C. If the room temperature drops below or rises above these
temperatures the energy consumption and performance may be affected. Avoid locating
your unit near a heat source, e.g. cooker, boiler or radiator. Also avoid direct sunlight as it
may increase the electrical consumption. Do not drape the unit with any covering.

Free Space Requirements

When installing the unit, ensure that 25 mm of
free space is left at both sides and 50 mm at the
rear of the unit. Please ensure there is adequate
space for the door to fully open at the top.

Installing the Door Handle

1. Collect the door handle, door lock, screws and handle
cover from inside the unit.
2. Place and screw the the door lock.
3. Place and screw the door handle.
4. Place the handle cover to cover the screws, bending it
slightly and fixing it flat onto the door handle.
• Make sure the door is always kept locked when not in use to prevent children from
playing with the unit.
• The door lock is specially designed to prevent the keys from being left inside the
lock.
• The door keys should be kept out of reach of children.
GB
15