Table of Contents
Advertisement
Getting Start
Programming Outline
Introduction
There are 3 ways to program user options:
1.
Code Programming: special encoded barcodes to work on "read & set options" base;
2.
Command Programming: a ASCII string, the Imager received from data cable as commands to set options;
3.
QuickSet：a programming software exclusively use by Newland Auto-ID products. It displays decoded data
and images captured. Programming work on "choose & set options" base from dialog windows.
Note: Programming results restore in non-volatile memories and will not lose when Power OFF.
Code Programming
Please read "Code Programming ON" bar to activate "Code Programming" function. More than one
programming code can be read at a time allows various programming. Terminate code programming function by
reading "Code Programming OFF", or by reading an ordinary barcode.
Some code programming may use digits. They can be "input" by reading relevant codes See Appendix for digit
codes.
** Code Programming OFF
【Pro CMD：0006000】
nlscan.com
Code Programming ON
【Pro CMD：0006010】
Page 10
Advertisement
Table of Contents
