Deif 4189340315C Operator's Manual page 12

BGC
View window 3
Display of measured values according to the selections made during configuration.
The V3 display changes with running modes:
First display line indicates running status of the unit. Statuses are:
- Manual: No regulation, protections are active.
- AMF: Automatic start/stop according to Automatic Mains Failure selected
functionality.
Island: Island (stand alone) generator or island load sharing with other generators
-
(option G3).
- Peak shaving (option G3): Parallel with mains (grid) cutting the top load off the
mains supply according to selected values.
Fixed power (option G3): Delivering a predefined amount of power to the mains
-
(grid).
Second and third display lines display measured values.
Fourth display line displays the selection line.
Display V3 follows the selection in V1 as follows:
1: Window 1: (Start prepare)
2: Window 2: (Synchronising)
3: Window 3: (Ramp up/down)
4: Window 4:
5: Window 5: (Default* (when none of the above are in operation))
View window overview
Windows
Window 1
(used in V2, V3)
Window 2
(used in V2, V3)
Window 3
(used in V2, V3)
Window 4
(used in V2, V3)
Window 5
(used in V2, V3)
Window 6
Window 7
Window 8
Window 9
Window 10
Window 11
Window 12
Window 13
Window 14
Window 15
* The default window is automatically selected after the ramping up, when the gen-set is in normal
operation, e.g. fixed power mode.
DEIF A/S
View 1
Manual selection with
UP or DOWN push-
buttons
View 2
Changes
automatically between
the 5 first windows:
1. Window 1 (Start
prepare)
2. Window 2 (Sync.)
3. Window 3 (Ramp
up/down)
4. Window 4
5. Window 5
(Default*)
No manual selection.
All three lines show
measurements
Operator's Manual
View 3
Changes
automatically between
the 5 first windows:
1. Window 1 (Start
prepare)
2. Window 2 (Sync.)
3. Window 3 (Ramp
up/down)
4. Window 4
5. Window 5
(Default*)
No manual selection.
Line 1 shows the text
1...5. Line 2 and line 3
show measurements
Page 12 of 15