Procom MN180TPA-B Owner's Operation And Installation Manual page 12

Front View
Heater
Side View
Figure 12 - Installing Bottom Mounting
Screws
Before installing heater to base, please make
sure you have a hardware packet that con-
tains the following items:
2 - Base Feet
4 - Sheet Metal Screws
1. Carefully lay heater on its back on a table
with the bottom of the heater extending
outside the table edge.
2. Attach base feet to heater using sheet
metal screws.
12
INSTALLATION
Wall
Spacer
INSTALLATION OF BASE STAND
(If Used)
www.usaprocom.com
Base Feet
Sheet Metal Screws
Figure 13 - Installing Base Feet
200045-02A