Table of Contents
Advertisement
3.
Safety
Unit may start automatically at any time even if the switch is
in the OFF position. Use proper lockout/tagout procedures
before inspection/servicing. All unit inspection/servicing by
properly trained personnel only.
Be aware of HIGH VOLTAGE supplied at the power plug.
When performing service or maintenance procedures:
ensure the START/RUN-OFF switch is in the OFF position
and lockout/tagout the high voltage receptacle.
This Carrier Transicold refrigeration unit has been designed with the safety of
the operator in mind. During normal operation, all moving parts are fully
enclosed to help prevent injury. During any inspection or servicing with the
doors open you may be exposed to moving parts. Please stay clear of all
moving parts when the unit is in operation.
Refer to the Operation and Service Manual for a complete list
3.1
Auto-Start
This unit is equipped with Auto-Start in Start-Stop and Continuous Operation.
The unit may start at any time. A buzzer will sound for five seconds before the
unit is started. When performing any check of the refrigeration unit (e.g.,
checking evaporator/condenser fans), place unit in Inspect mode and unplug
the high voltage connector.
WARNING
!
WARNING
!
NOTE TO TECHNICIANS
of safety precautions.
3
62-11784
Advertisement
Table of Contents
