Table of Contents
Advertisement
6.
Inspect Mode
Inspect mode provides an additional layer of safety for operators and
technicians. Inspect mode should be used during all pretrip inspections of the
unit.
Inspect mode is a user activated feature that forces the unit to shutdown and
remain in shutdown.
After unit inspection, Inspect mode must be manually disabled, at which point
the unit will resume standard operation.
Inspect mode is not a substitute for proper Lockout/Tagout procedures, which
are always required when servicing the unit.
START/STOP
ELECTRIC
COOL
34
.3 34
o
o
BOX TEMPERATURE
F
SETPOINT
F
INSPECT
EXIT
MODE
1
2
6.1
Enter Inspect Mode
1. With the system powered up (START/RUN-OFF switch in the START/RUN
position) press the MENU key until INSPECT MODE is displayed.
2. Press the INSPECT MODE soft key, the unit will shut down.
While the unit is in Inspect mode the ALARM light will flash, and the display
will indicate that unit operation, including temperature control, has been
disabled.
9
62-11784
Advertisement
Table of Contents
