Table of Contents
Advertisement
Prime Proprietary
General Description
TABLE 1-4: 50 SERIES WEIGHT
WEIGHT
TYPE
LB (KG)
150, 150-II,
400 (180)
250, 250-II,
450
450-II, 550,
425 (190)
550-II, 650
750, 850
450* (200)
*Weight per cabinet.
1.3 RELATED DOCUMENTATION
Related 50 Series CPU system documentation is listed in Table 1-5.
TABLE 1-5:
50 SERIES CENTRAL SYSTEMS DOCUMENTATION
DOCUMENTATION NAME
PART NUMBER
Planning and Installation Guide
DOC6426-901
(Rev.19.0)
Prime User's Guide
DoCc4130-190
System Administrator's Guide (Rev. 19.0)
DOC5037-190
(Rev 19.1)
UPD5037-191
(Rev 19.2)
UPD5037~-192
Site Preparation Guide
IDR5029
System Architecture Guide (19.2)
boc3060-192
System Operator's Guide Vol. I, (19.2)
DOC7 323-192
System Operator's Guide Vol. II, (19.2)
_
DOC7324-192
1.4 FCO LOG
Prime Field Change Orders (FCOs) are generated
whenever
a_
condition
exists
which
requires that a machine(s) in the field be changed.
It
is important that FCOs be installed in the units in
a
timely
manner
and
the
FCO
log
with
the
equipment
be kept current.
Without an
accurate record of the changes which have been installed in the
unit,
it
would
be
impossible
to
relate the machine configuration to the
manual.
1.5 EQUIPMENT IDENTIFICATION
To locate the equipment identification (ID) and model
number
plates,
go
to
the rear of the I/O cabinet and look at the lower right corner
of the door.
The system ID plate provides the number
by
which
each
type
of
system
is
identified.
The model number plate provides the
following information:
1 -
7
070-C
Advertisement
Table of Contents
